Tuesday, May 20, 2014

Connecting to i.MX6 with Ethernet

The first way you will probably connect to i.MX6 is via "Debug" Serial-to-USB cable, which is covered by one of my previous posts.

Connect i.MX6 to Ethernet, if you are using WiFi, you can share the connection with your Mac as shown in the picture below:

Go to your CootTerm, or whatever you use to connect Serial to USB:

root@imx6qsabrelite:~# ifconfig
eth0      Link encap:Ethernet  HWaddr 1e:ed:19:27:1a:b3
          inet addr:  Bcast:  Mask:

Now open Terminal and you can

$ ssh  root@